Backup Lamp: Service and Repair

Replacing Bulb For Reverse Light







From behind bumper, release reverse light retaining clip (1).
Release reverse light from bumper cover.
Release reverse light bulb holder (2) anti-clockwise and remove light (3).
Remove bulb (4).

Install hint:
Do not touch glass part of bulb with bare fingers. Only touch bulb on its base or with a clean cloth or packaging of light bulb.

Install hint:
Prior to refitting bulb holder to light, ensure the seal (5) is seated correctly and is clean.


NOTE: For new bulb specification, See Fog/Driving Lamp/Specifications.