Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 1992 >> 3000GT V6-2972cc 3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

NOTE: Crankshaft Position / Camshaft (TDC) Sensor are replaced as a complete unit.

REMOVAL:
1. Disconnect battery ground cable.
2. Place an alignment mark on sensor body and engine block, indicating position of sensor body in block or cylinder head. Place No. 1 cylinder to TDC of compression stroke.
3. Disconnect wiring harness from sensor.
4. Remove sensor mounting nut, then the sensor assembly from engine.

Alignment Marks:





INSTALLATION:
5. Reverse procedure to install. Align notch on drive blade with punch mark on housing, and install sensor in head.
6. Ensure alignment marks made are properly aligned. Ensure No. 1 cylinder is at TDC of compression stroke.
7. Check and adjust ignition timing.

pro multis · About Operation CHARM