Fog/Driving Lamp: Service and Repair

Fog Light Bulb Replacement:

1. Remove the fog light.

Fog Light Bulb Replacement:

2. Detach the cap.
3. Remove the retainer pin and take out the bulb.

CAUTION:
a. Never hold the halogen light bulb with a bare hand, dirty glove, etc.
b. If the glass surface is dirty, be sure to clean it with alcohol, paint thinner, etc., and install it after drying it thoroughly.

4. Be sure to attach the cap.

NOTE: Be sure to install the cap securely because, if it is not, an insecure installation could cause such problems as clouding of the lens, or intrusion of moisture to inside the light unit.

5. Install the fog light and make the aiming adjustment.