Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 1994 >> Montero SR 4WD V6-3.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Temperature Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Temperature Sensor: Testing and Inspection

NOTE: The test procedure below is for the sensor itself. Testing of the system and its harness are found in Diagnostic Charts, Trouble Code 43.




INSPECTION
1. Remove the EGR temperature sensor.
2. Place the EGR temperature sensor in water, and then measure the resistance value between terminals 1 and 2 while increasing the water's temperature. Replace the EGR temperature sensor if there is a significant deviation from the standard value.

Temperature versus Resistance
At: 50°C (122°F) should be: 60-83kOhms
At: 100°C (212°F) should be: 11-14kOhms

INSTALLATION
Install the EGR temperature sensor and tighten to specified torque.

Specified tightening torque: 11 Nm (8 ft.lbs.)

pro multis · About Operation CHARM