Service Specifications
| Basic ignition timing at idle | Standard value | 5 deg BTDC +/- 3 deg |
| Actual ignition timing at curb idle | Standard value | Approximately 10 deg BTDC |
| CO contents | Standard value | 0.5 % or less |
| HC contents | Standard value | 100 ppm or less |
| Curb idle speed | Standad value | 700 +/- 100 r/min |
| Compression pressure (250-400 r/min) | Standard value | 1200 kPa |
| Limit | Minimum 890 kPa | |
| Compression pressure difference of all cylinder | Limit | 100 kPa |
| Intake manifold vacuum at curb idle | Limit | Minimum 60 kPa |
| Auto-tensioner pushrod movement | Standard value | Withing 1.0 mm |
| Timing belt tension torque | Standard value | 4.4 Nm |
| Auto tensioner rod protrusion amount | Standard value | 3.8 - 5.0 mm |