Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 1982 >> 210 L4-1237cc 1.2L (A12a) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Distributor >> Service and Repair >> Distributor Replace
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Distributor Replace


REMOVAL

1. Mark position of No. 1 tower of distributor cap on distributor housing.
2. Remove distributor cap.
3. Crank engine to align rotor with No. 1 mark on housing.
4. Place a mark between distributor housing and engine.
5. Remove distributor retaining bolt and the distributor. Do not crank engine when distributor is removed from engine.

INSTALLATION

1. Align rotor with No. 1 mark on housing.
2. If engine was cranked when distributor was removed from engine, crank engine until No. 1 cylinder is on compression stroke and the timing marks align on the pulley and front cover.
3. Install distributor into engine, aligning all index marks made during removal.
4. Loosely install distributor retaining bolt.
5. Adjust ignition timing and tighten distributor retaining bolt.


pro multis · About Operation CHARM