Inspection
ACCELERATOR CONTROL SYSTEM
Inspection
INSPECTION AFTER INSTALLATION
- Check that accelerator pedal moves smoothly within the whole operation range when it is depressed fully and released.
- Check that accelerator pedal returns securely to the fully released position.
- For the electrical inspection of accelerator pedal position sensor. Refer to the following:
- For California: For California, For California, and For California.
- For Mexico: For Mexico, For Mexico, and For Mexico.
- Except for California and Mexico: For USA (Federal) And Canada, For USA (Federal) And Canada, and For Mexico.
- CAUTION:
When harness connector of accelerator pedal position sensor is disconnected, perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING". Refer to For California
For Mexico
For USA (Federal) And Canada