Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor (TPS) Replacement

Throttle Position Sensor (TPS):

REMOVE OR DISCONNECT:
1. TPS electrical connector.
2. Using a #25 torx bit remove two TPS attaching screws and retainers.
3. TPS sensor.

INSTALL OR CONNECT:
1. With the throttle valve in the normally closed idle position, install throttle position sensor on throttle body assembly, making sure TPS pickup lever lines up with tang on throttle actuator lever.
2. Two TPS screws and tighten to 2.0 N-m (18.0 in lbs).