Preparation For Shipping

D. PREPARATION FOR SHIPPING:

Remove engine assembly as outlined in the 1993 Service Manual. Remove all plastic shipping plugs and covers from the exchange unit and install them on the removed unit.

Repack the removed unit into the original shipping container.



E. SHIPPING INSTRUCTIONS:

Place the shipping label over the original label on the original shipping container.

The Bill of Lading and Custom Papers provided with the exchange engine are the only documents required, to return ship the removed engine.

NOTE:
The same carrier, whose name is indicated on the Bill of Lading, should be used for the return engine shipment.

All required data on the Bill of Lading will be complete, except for the date and carrier signature. After the Bill of Lading has been dated and signed by the carrier, retain the last copy with your repair order and provide the other two copies to the carrier. Your copy of the Bill of Lading, signed by the carrier is your proof of returning the engine.

The removed engine is to be shipped by Truck Freight Collect to:

St. Catharines Engine Plant
570 Glendale Ave.
St. Catharines, Ontario L2R 7B3

Attn: Z34 Engine Exchange Program
Quality Assurance Department

To increase the effectiveness of the program, the removed unit should be returned IMMEDIATELY. Failure to return the removed unit will result in the dealership being billed $3,000.00 for the unit furnished, plus an Administrative Charge.