Shift Interlock Cable: Adjustments

Fig. 3 Terminal Stop Position.:

Fig. 4 Park/Lock Cable Position.:

1. Place floor shift lever in Park.
2. Turn steering column lock cylinder to lock.
3. Unseat body housing lock from body housing.
4. With body housing still attached to shift control mounting bracket, adjust outer cable conduit to obtain proper location for white plastic housing in the ignition switch, Fig. 3.
5. White plastic collar must either be flush or recessed approximately 0.04 inch within ignition park lock housing, Fig. 4.
6. While holding outer cable conduit in position, seat body housing lock in body housing.