Traction Control Switch: Service and Repair

Remove or Disconnect
1. Unsnap the front floor console accessory trim plate (26).
2. Electrical connector from the traction control switch (21).
3. Electrical connector from the convertible top switch (38), if equipped.
4. Unsnap the second gear start switch (21) from the front floor console accessory trim plate (26).

Install or Connect
1. Second gear start switch (21) to the front floor console accessory trim plate (26).
2. Electrical connector to the convertible top switch (38), if equipped.
3. Electrical connector to the traction control switch (21).
4. Front floor console accessory trim plate (26).