Power Steering Gear and Pump

Adjuster Plug Locknut 70 Nm (50 ft. lbs.)
Crossmember Support Bolt:
Left Rear Outboard 110 Nm (71 ft. lbs.) plus 90° rotation
Right Rear Outboard 110 Nm (71 ft. lbs.) plus 90° rotation
Upper Front 110 Nm (71 ft. lbs.) plus 90° rotation
Rear Inboard 110 Nm (71 ft. lbs.) plus 90° rotation
Inner Tie Rod Bolts 90 Nm (65 ft. lbs.)
Pinion:
Locknut 35 Nm (26 ft. lbs.)
Preload 1.8 Nm (16 inch lbs.)
Power Steering Inlet Line Fittings 27 Nm (20 ft. lbs.)
Power Steering Pump Mounting 26 Nm (19 ft. lbs.)
Lower Center Bolt 30 Nm (22 ft. lbs.)
Upper Side Bolts 30 Nm (22 ft. lbs.)
Rack And Pinion Cylinder Line Fittings:
At Valve End 27 Nm (20 ft. lbs.)
At Cylinder End 28 Nm (21 ft. lbs.)
Rack And Pinion Mounting Bolts 120 Nm (89 ft. lbs.)
Steering Column Pinch Bolt:
Lower 41 Nm (30 ft. lbs.)
Upper 41 Nm (30 ft. lbs.)
Tie Rod:
End To Steering Knuckle Nut 50 Nm (37 ft. lbs.)
Pinch Bolts 42 Nm (31 ft. lbs.)