Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 1997 >> Sunfire L4-2.2L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Fluid Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fluid Pressure Sensor/Switch: Service and Repair






REMOVE OR DISCONNECT
1. Remove negative battery cable.
2. Remove transaxle case side cover. See "Case Side Cover".
3. Remove Pressure switch assembly, (6 bolts).

Important
- Inspect the O-rings for the pressure switch assembly for any damage.

INSTALL OR CONNECT
1. Install the pressure switch assembly making sure all O-rings are in place.
2. Torque the 6 bolts holding the pressure switch assembly to 12 N.m (9 lb. ft.).
3. Install the transaxle case side cover. Refer to "Case Side Cover".
4. Connect the negative battery cable.
5. Refill transaxle with fluid to proper level. See "Oil Level Checking and Fill procedure".

pro multis · About Operation CHARM