Frontal SIR System Install or Connect

Use hand tools only to achieve fastener torque. This will prevent stripping of the replacement fastener

Install or Connect
1. The Sensing and Diagnostic Module (SDM) to the vehicle, make sure the arrow is pointing toward the front of the vehicle.
2. The SDM fasteners.

TIGHTEN
^ Fasteners to 10 N.m (89 lb in).

3. The electrical connector and the CPA.
4. The carpet and the passenger front carpet retainer.
5. The passenger front seat.

Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.

TIGHTEN
Fasteners to 10 N.m (89 lb in).