Fastener Tightening Specifications - Cylinder Head

1. Tighten the M11 cylinder head bolts a first pass in sequence to 30 Nm (22 lb ft).
2. Tighten the M11 cylinder head bolts a second pass in sequence to 90 degrees using the J36660.
3. Tighten the M11 cylinder head bolts (1,2,3,4,5,6,7,8) to 90 degrees and the M11 cylinder head bolts (9 and 10) to 50 degrees a final pass in sequence to using the J36660.
4. Tighten the M8 cylinder head bolts (111, 12,13,14,15) to 30 Nm (22 lb ft). Begin with the center bolt (111) and alternating side-to-side, work outward tightening all of the bolts.