Headlamp/Turn Signal/Cruise Control/Hazard Switch

REMOVE OR DISCONNECT
This lever includes the headlamp, headlamp dimmer, turn signal and hazard switches. It also includes the cruise control switch, if equipped.
1. Inflator module and steering wheel.
2. Tilt lever from column (if used).

NOTICE: If necessary, use locking pliers with a piece of rubber (such as a spark plug boot) between the jaws to aid in preventing damage to the tilt lever during removal.

3. Upper and lower steering column covers.
4. Dampener assembly.
5. Switch assembly.

INSTALL OR CONNECT
1. Switch assembly.
2. Dampener assembly.
3. Upper and lower steering column covers.
4. Tilt lever to column (if used).
5. Inflator module and steering wheel.