Changing the Feature Customization Modes

Perform the following procedure to change the feature customization modes:
1. Turn off the I/P dimmer switch.
2. Turn the ignition switch to the LOCK position.
3. Remove the BCM PRGRM fuse.
4. Turn the ignition switch to the ACC position.
- The BCM sounds the chime a number of times equivalent to the BCM type installed on the vehicle (1, 2, 3, or 4 chimes). Make sure vehicle has either a BCM type 3 or 4. Refer to Body Control Module (BCM) for more information.
- Now the BCM has entered the feature customization mode.
5. To change the remote unlock control mode, press and release the unlock button on the keyless entry transmitter.
- The BCM sounds the chime a number of times equivalent to the remote unlock control mode. A transition past mode 2 repeats the sequence starting with mode 1.
6. To change the remote activation verification mode, press and release the lock button on the keyless entry transmitter.
- The BCM sounds the chime a number of times equivalent to the remote activation verification mode. A transition past mode 4 repeats the sequence starting with mode 1.

To exit and save the current feature customization modes:
1. Turn the ignition switch to the LOCK position.
2. Reinstall the BCM PRGRM fuse.

If unable to change the feature customization modes, refer to Body Control Module (BCM) for further diagnosis. Body Control Module