Drive Belt: Service and Repair

Removal Procedure





The supercharged 3800 engine uses two drive belts. The outer belt drives the supercharger. The inner belt drives the generator, power steering pump, coolant pump and air conditioning compressor. All driven accessories are rigidly mounted to the engine. Drive belt tension is maintained by the spring loaded belt tensioners. Each belt has its own tensioner.
A belt squeak when the engine is started or stopped is normal and has no effect on belt durability. The drive belt tensioner can control belt tension over a broad range of belt lengths due to stretching.
1. Rotate the tensioner (2) counter-clockwise to remove the drive belt (1).
2. Remove the supercharger belt (1) from the engine.





3. Rotate the tensioner (2) counter-clockwise to remove the drive belt (1).
4. Remove the accessory belt (1) from the engine.

Installation Procedure





1. Position the accessory drive belt (1) to the pulleys.
2. Rotate the tensioner (2) counter-clockwise to install the drive belt (1).





3. Position the supercharger drive belt (1) to the pulleys.
4. Rotate the tensioner (2) counter-clockwise to install the drive belt (1).