Brake Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the rear window trim panel.
2. Open the rear compartment.
3. Depress the two retaining tabs (1) on the underside of the high-mounted stoplamp and slide the lamp assembly toward the front of the vehicle.
4. Close the rear compartment.
5. From inside the vehicle, lift the high-mounted stoplamp assembly locating tabs (2) out of the slots on the rear shelf panel.
6. Rotate the high-mounted stoplamp sockets counterclockwise to release from the high-mounted stoplamp assembly.

INSTALLATION PROCEDURE
1. Install the high-mounted stoplamp sockets to the high-mounted stoplamp assembly, then rotate the sockets clockwise to secure.
2. Install the high-mounted stoplamp assembly locating tabs (2) into the slots on the rear shelf panel.
3. Slide the high-mounted stoplamp assembly toward the rear of the vehicle to secure the retaining tabs (1).
4. Install the rear window trim panel.