Feature Customization - Automatic Door Lock - Changing Operation Mode

Complete the following steps in order to change the automatic door lock operation mode:
1. Turn off the Instrument Panel dimmer switch.
2. Turn the ignition switch to the OFF position.
3. Remove the MALL PGM fuse.
4. Turn the ignition switch to the ACC position.
The BCM sounds the chime 1-4 times. The BCM will sound the chime a number of times that corresponds to the BCM type that is installed to the vehicle.
The chime indicates that the BCM has entered the feature customization mode.
5. Press and release LOCK on either door lock switch.
The BCM will sound the chime a number of times that is equivalent to the automatic door lock operation mode. A transition past mode 4 repeats the sequence starting with mode 1.
6. Complete the following steps in order to exit and save the current customization mode:
^ Turn the ignition switch to the OFF position.
^ Reinstall the MALL PGM fuse.