Circuit Description

The fuel sensor is attached to the modular fuel sender. The resistance of the fuel sensor changes with the fuel level by means of a rheostat. As the position of the float varies with the fuel level, the rheostat produces a variable resistance. The PCM converts this variable resistance into the fuel level reading, then the reading is sent to the Instrument Panel Cluster (IPC) and displayed on the fuel gage.

The fuel lever sensor is an important input to the control module for the enhanced evaporative system diagnostic. The fuel level information is needed by the control module to determine the volume of the fuel tank. The fuel level affects the rate of charge in the air pressure in the EVAP system. Several of the enhanced evaporative system diagnostic sub-tests are dependent upon the correct fuel level information.