Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2000 >> Sunfire L4-2.2L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Flex Plate >> Service and Repair >> Engine Flywheel Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Flywheel Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Disconnect the negative battery cable.

Important: Mark the relationship of the pressure plate assembly to the flywheel. This will ensure proper balance during assembly.

2. Remove the clutch and pressure plate for the manual transmission. Refer to Clutch Drive Plate and Clutch Driven Plate.
3. Remove the flywheel attaching bolts.
4. Remove the retainer (automatic transmission only).
5. Remove the flywheel.
6. Clean the thread adhesive thoroughly from the flywheel bolts and bolt holes.

Installation Procedure





1. Apply GM P/N 1052624, or equivalent to all flywheel bolts. Follow instructions carefully to ensure proper bolt retention.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the flywheel and the bolts.
^ Tighten the bolts to 75 Nm (55 ft. lbs.).
3. Install the clutch and pressure plate for the manual transmission. Refer to Clutch Drive Plate and Clutch Driven Plate.
4. Install the transmission. Refer to Transmission Replacement Transmission and Drivetrain.
2. Install the right splash shield. Refer to Splash Shield Replacement - Wheelhouse.
pro multis · About Operation CHARM