Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

PNP Switch Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Remove the throttle body air inlet duct.
2. Remove the automatic transaxle range selector cable from the wiring harness clip or strap.
3. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.





4. Remove the automatic transaxle range selector cable from the automatic transaxle range selector cable bracket.
5. Remove the automatic transaxle range selector cable from the console shift control or the column shift control.
6. Pull the automatic transaxle range selector cable through the dash from the engine compartment side.

Installation Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Insert the automatic transaxle range selector cable through the dash from the engine compartment side.
2. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket.





3. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
4. Install the automatic transaxle range selector cable to the wiring harness clip or strap.
5. Install the automatic transaxle range selector cable to the console shift control or the column shift control.
6. Adjust the automatic transaxle range selector cable.
7. Install the throttle body air inlet duct.
pro multis · About Operation CHARM