Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Seals and Gaskets >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair

Axle Shaft Oil Seal Replacement

^ Tools Required
- J 2619-01 Slide Hammer
- J 23129 Universal Seal Remover
- J 29794 Axle Shaft Remover Extension
- J 44752 Bearing, Race, and Seal Installer

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel assembly.
3. Remove the right front wheel drive shaft.
4. Using the J 2619-01 with the J 29794 and the J 23129 remove the axle shaft oil seal (1) from the transfer case.

Installation Procedure





1. Lubricate the lip of the axle shaft oil seal with automatic transaxle fluid.
2. Using the J 44752 install the axle shaft oil seal to the transfer case.

Important: Carefully guide the axle shaft past the axle shaft oil seal. Do NOT allow the shaft splines to contact any portion of the sealing surface or damage to the oil seal can occur.

3. Install the right front wheel drive shaft.
4. Install the right front tire and wheel assembly.
5. Lower the vehicle.
6. Inspect the transaxle fluid level.
7. Inspect for fluid leaks.
pro multis · About Operation CHARM