Upper

Radiator Hose Replacement Upper

Removal Procedure

1. Drain cooling system.





2. Remove the radiator inlet hose and the clamps (1) from the radiator.
3. Remove the radiator inlet hose and the clamps (1) from the engine.

Installation Procedure

Notice: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which could cause the fitting to crack or break.





1. Install the radiator inlet hose and the clamps (1) to engine.
2. Install the radiator inlet hose and the clamp (1) to the radiator.
3. Fill cooling system.
4. Start the engine. After the engine reaches normal operating temperature' check for coolant leaks.