Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2002 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> HVAC System - Automatic
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

HVAC System - Automatic

HVAC CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the IP cluster trim plate bezel.
2. Remove the HVAC control module retaining screws.




3. Pull the HVAC control module out from the IP.
4. Disconnect the aspirator hose (1) from the HVAC control module.
5. Disconnect the electrical connector from the HVAC control module.
6. Remove the HVAC control module.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the HVAC control module.
2. Connect the aspirator hose (1) to the HVAC control module.
3. Install the HVAC control module to the IP.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the HVAC control module retaining screws.

Tighten
Tighten the screws to 2.5 N.m (22 lb in).

5. Install the IP cluster trim plate bezel.
pro multis · About Operation CHARM