Transfer Case - Revised Fastener Torque Specification
File In Section: 04 - Driveline AxleBulletin No.: 01-04-21-001
Date: December, 2001
SERVICE MANUAL UPDATE
Subject:
Transfer Case-Steyr - Revised Fastener Tightening Specification
Models:
2002 Buick Rendevous
2002 Chevrolet Venture
2002 Oldsmobile Silhouette
2001-2002 Pontiac Aztec
2002 Pontiac Montana
with All-Wheel Drive (RPO M76)
This bulletin is being issued to revise the Transfer Case Assemble service procedure and the Fastener Tightening Specifications tables in the Transfer Case Steyr on-vehicle and Unit Repair sections. The following information has been updated within SI2000. If you are using a paper version of this Service Information, please make a reference to this bulletin on the affected page(s).
The torque value for the output driveshaft nut (1) has been revised to 505 Nm (372 lb ft). Please update your Service Information to the revised torque value.
DISCLAIMER