Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2003 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 71. Engine Front Cover Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

71. Engine Front Cover Installation

Engine Front Cover Installation





1. Install the engine front cover gasket.
2. Apply sealer GM P/N United States 12346004, GM P/N Canada 10953480 or equivalent to both sides of the lower tabs of the engine front cover gasket, and the engine front cover bolts.





3. Install the engine front cover.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the engine front cover bolts (2).
Tighten the engine front cover bolts (2) to 55 Nm (41 ft. lbs.).
5. Install the engine front cover bolts (3).
Tighten the engine front cover bolts (3) to 55 Nm (41 ft. lbs.).
6. Install the engine front cover bolts (1).
Tighten the engine front cover bolts (1) to 27 Nm (20 ft. lbs.).





7. Install the crankshaft position sensor wiring bracket.
8. Install the crankshaft position sensor wiring bracket bolt.
Tighten the crankshaft position sensor wiring bracket bolt to 40 Nm (30 ft. lbs.).
pro multis · About Operation CHARM