Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2003 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL PROCEDURE




1. Disconnect all the electrical connectors at the ignition control module (ICM).
2. Note the position of the spark plug wires for installation and disconnect the spark plug wires from the ignition coils.
3. Remove the screws securing the coil assemblies to the ignition control module.
4. Disconnect the coils from the ignition control module.
5. Remove the fasteners securing the ignition control module assembly to the engine.
6. Remove the ignition control module from the bracket.

INSTALLATION PROCEDURE
1. Install the ignition control module on the bracket.




2. Install the coils to the ignition control module.
3. Reinstall the fasteners securing the ignition control module assembly to the engine.
4. Reinstall the screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 4.5 N.m (40 lb in).

5. Connect the spark plug wires as noted during removal.
6. Connect the electrical connectors to the ignition control module.
pro multis · About Operation CHARM