Seat Belt Guide Track: Service and Repair

SHOULDER BELT GUIDE ADJUSTER REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the center pillar upper trim panel.
2. Remove the bolts from the shoulder belt guide adjuster bracket.
3. Remove the shoulder belt guide belt adjuster bracket from the center pillar.

INSTALLATION PROCEDURE




1. Install the shoulder belt guide adjuster bracket to the center pillar.

IMPORTANT: Verify that the release lever is at the top of the adjuster bracket in the full up position.

2. Install the bolt to the shoulder belt guide belt adjuster bracket.

Tighten
Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the center pillar upper trim panel.