Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Switch: Service and Repair

Multifunction Turn Signal Lever Replacement - On Vehicle

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the Supplemental Inflatable Restraints (SIR).
2. Remove the steering column trim cover.
3. Remove the multifunction switch (2) retaining screw.





4. Disconnect the electrical connectors (3) from the multifunction switch (1).
5. Remove the multifunction switch (1) from the steering column (2).

Installation Procedure





1. Position the multifunction switch (1) on the steering column (2) while depressing the spring loaded horn pin.
2. Connect the electrical connectors to the multifunction switch (1).





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the multifunction switch (2) retaining screw.
^ Tighten the multifunction switch retaining screws to 4 Nm (35 inch lbs.).
4. Install the steering column trim cover.
5. Enable the SIR system.