Seat Temperature Control Module: Service and Repair

HEATED SEAT CONTROL MODULE REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the seat cushion trim cover and pad to expose the heater control module (3).
2. To remove the module from the seat inboard frame, pinch the retaining pin together and pull the module out.




3. Disconnect the module from the electrical connector.
4. Remove the module from the vehicle.

INSTALLATION PROCEDURE




1. Position the module to the seat frame.
2. Connect the module to the electrical connector.
3. Press the module in to engage the connector in the seat frame.
4. Install the seat cushion trim cover and pad.