Turn Signal Bulb: Service and Repair

PARK/TURN SIGNAL LAMP BULB REPLACEMENT (PONTIAC)


REMOVAL PROCEDURE
1. Open the hood.
2. Remove the hood close out filler panel.






3. Reach behind the park/turn signal lamp assembly. Remove the park/turn signal bulb/socket by depressing the tab and rotating the bulb/socket counterclockwise.
4. Remove the bulb from the socket.

INSTALLATION PROCEDURE
1. Install the bulb into the bulb socket.






2. Install the bulb/socket into the lamp by rotating the bulb/socket clockwise until the tab locks.
3. Install the hood close out filler panel.
4. Close the hood.