Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2003 >> Sunfire L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Output Shaft >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Shaft: Service and Repair

Output Axle Shaft Sleeve and Seal Replacement

^ Tools Required
- J 41227 Output Shaft Sleeve Remover
- J 41228 Stub Shaft Sleeve Installer

Removal Procedure
1. Raise the vehicle. Support the vehicle.
2. Remove the drive axle assembly.





3. Remove the snap ring from axle.





4. Remove the stub axle seal.





5. Use the J 41227 to remove the sleeve from the stub axle.

Installation Procedure

Important:

1. The stub axle shaft sleeve and seal must be replaced together. DO NOT replace the sleeve or seal separately.





2. Use the J 41228 to install a new sleeve on the stub axle shaft. Ensure that the collet is located in the snap ring groove when installing.





3. Install the new stub axle seal.





4. Install one new snap ring on the output shaft.
5. Install the drive axle assembly.
6. Lower the vehicle.
7. Inspect the output axle shaft sleeve for leaks.
8. Inspect the transmission oil level.
pro multis · About Operation CHARM