Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2003 >> Vibe AWD L4-1.8L VIN 8 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Remove the two fasteners and swing the rear seat bottom cushion up and out of the way.
2. Remove the sill plate from the left side door opening.
3. Fold back the carpet in order to maintain metal-to-metal contact while servicing the fuel sender assembly.
4. Remove the access panel for the fuel sender assembly from the rear seat floor. The panel is held in place by a butyl caulk seal.




5. Disconnect the fuel sender electrical connector (1) from the fuel sender assembly.
6. Disconnect the electrical connector of the fuel tank pressure (FTP) sensor (2) from the fuel sender assembly.
7. Remove the retaining clip (2) from the FTP sensor.
8. Remove the FTP sensor (1) from the fuel sender assembly.

INSTALLATION PROCEDURE




1. Install the FTP sensor (1) to the fuel sender assembly.
2. Install the retaining clip (2) to the FTP sensor.




3. Connect the fuel sender electrical connector (1).
4. Connect the FTP sensor electrical connector (2).
5. Inspect the butyl caulk seal for the fuel sender access panel (1). Replace any missing butyl caulk as necessary.
6. Install the access panel to the rear seat floor.
7. Relocate the carpet under the seat and the left sill plate area.
8. Install the sill plate to the left side door opening.
9. Install the rear seat bottom cushion.
10. Secure the seat cushion with the two fasteners. Refer to Seat Cushion Replacement - Rear in Seats.
pro multis · About Operation CHARM