Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Side Impact Sensor Replacement

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones .
2. Remove the front door sill plate.
3. Remove the rear door sill plate.
4. Remove the center pillar lower trim panel.
5. Remove the front seat belt retractor.
6. Remove the side impact sensor electrical connector.




7. Remove the side impact sensor fasteners (2).
8. Remove the side impact sensor (1).

INSTALLATION PROCEDURE




1. Install the side impact sensor (1).
2. Install the side impact sensor fasteners (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fasteners to 8 N.m (71 lb in).

3. Install the side impact sensor electrical connector.
4. Install the front seat belt retractor.
5. Install the center pillar lower trim panel.
6. Install the rear door sill plate.
7. Install the front door sill plate.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zones.