Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2003 >> Vibe L4-1.8L VIN L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> MU4
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

MU4

Vehicle Speed Sensor (VSS) Replacement

^ Tools Required
- J 36350 Transmission Assembly Lubricant

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Disconnect the negative (-) battery cable.
2. Disconnect the Vehicle Speed Sensor (VSS) electrical connector.
3. Remove the 1 retaining bolt (1) anal the VSS (2) from the transaxle.
4. Inspect the VSS O-ring for cuts or damage. Replace as necessary.

Installation Procedure





1. Apply J 36350 to the VSS O-ring.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the Vehicle Speed Sensor (VSS) into the transaxle case. Secure the VSS (2) with the retaining bolt (1).
^ Tighten the VSS speed sensor (VSS) bolt to 6 Nm (53 inch lbs.).
3. Connect the VSS electrical connector.
4. Connect the negative (-) battery cable.
pro multis · About Operation CHARM