Rear Door Window Regulator: Service and Repair

Window Regulator Replacement - Rear Door

Removal Procedure





1. Remove the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .
2. Remove the following components from the rear door:

* The 4 retaining bolts (4)
* The rear side door window regulator (3)




Installation Procedure





1. Apply a multipurpose grease to all lubrication and sliding points.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Slide the regulator arm roller (2) into the window bottom channel (1). Secure the regulator with the 4 bolts (4).

Tighten the regulator bolts (4) to 8 N.m (71 lb in).

3. Install the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .