Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2004 >> GTO V8-5.7L VIN G >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Trim Plate Replacement - Console
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trim Plate Replacement - Console



Trim Plate Replacement - Console

Removal Procedure





1. Remove the console tray insert. Refer to Console Tray Insert Replacement (Console Tray Insert Replacement) .
2. Remove the screw (2) attaching the console trim plate (1) to the floor console.
3. Pull up on the console trim plate disconnecting the six retaining tabs.
4. Disconnect the power window switch and traction control switch connectors (3), if equipped.
5. Remove the power window switch. Refer to Power Window Switch Replacement (Power Window Switch Replacement) in Doors.
6. Remove the traction control switch, if equipped. Refer to Traction Control Switch Replacement (Manual Transmission) Traction Control Switch Replacement (Automatic Transmission) in Antilock Brakes System.
7. Remove the cupholder. Refer to Cupholder Replacement - Front Floor Console (Cupholder Replacement - Front Floor Console) .



Installation Procedure





1. Install the cupholder. Refer to Cupholder Replacement - Front Floor Console (Cupholder Replacement - Front Floor Console) .
2. Install the traction control switch, if equipped. Refer to Traction Control Switch Replacement (Manual Transmission) Traction Control Switch Replacement (Automatic Transmission) in Antilock Brakes System.
3. Install the power window switch. Refer to Power Window Switch Replacement (Power Window Switch Replacement) in Doors.
4. Connect the power window switch and traction control switch connectors (3).
5. Install the console trim plate (1) to the center console until the retaining tabs are engaged.

Notice: Refer to Fastener Notice in Cautions and Notices.

6. Install the screw (2) securing the console trim plate (1) to the center console.

Tighten the screw to 2 N.m (18 lb in).

7. Install the console tray insert. Refer to Console Tray Insert Replacement (Console Tray Insert Replacement) .


pro multis · About Operation CHARM