Procedures

Seat Switch Replacement - Power







Removal Procedure

1. Remove the front seat outer trim panel.
2. Remove 2 adjustment knobs (1) from the front seat adjustment switch (2), by prying with a small flat screwdriver.







3. Remove 3 seat adjustment switch retaining screws (1).
4. Remove the seat adjustment switch.








Installation Procedure
1. Position the seat adjustment switch to the seat cushion outer trim panel.

Notice: Refer to Fastener Notice in Cautions and Notices.
Fastener Notice

2. Install three seat adjustment switch retaining screws (1).


Tighten the seat adjustment switch retaining screws to 2 N.m (18 lb in).







3. Install two adjustment knobs (1) to the front seat adjustment switch (2).
4. Install the front seat outer trim panel.