Console Trim Plate Replacement - Front Floor

TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE

REMOVAL PROCEDURE




1. Remove rear cup holder liner and remove the screw.
2. Pull up on the trim plate to release the retainer clips.
3. Lift the trim plate and turn sideways in order to lift the trim plate over the transaxle shift lever.
4. Remove the trim plate from the front floor console.

INSTALLATION PROCEDURE
1. Align the trim plate to the front floor console.
2. Position the trim plate over the transaxle shift lever.
3. Install the trim plate to the front floor console and snap into place.




4. Install the rear trim plate screw and insert the cup holder liner.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2 N.m (18 lb in).