Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2005 >> Aztek FWD V6-3.4L VIN E >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Level Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Level Sensor: Service and Repair



Engine Oil Level Sensor and/or Switch Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Drain the oil from the oil pan.





3. Disconnect the electrical connector from the oil level sensor.





4. Remove the oil level sensor bolt.
5. Remove the oil level sensor from the oil pan.

Installation Procedure





1. Install the oil level sensor to the oil pan.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the oil level sensor bolt.
^ Tighten the bolt to 10 Nm (7 ft. lbs.).





3. Connect the electrical connector to the oil level sensor.
4. Lower the vehicle.
5. Ensure that the engine oil is filled to the proper level.
pro multis · About Operation CHARM