Console Trim Plate Replacement

TRIM PLATE REPLACEMENT - CONSOLE

REMOVAL PROCEDURE




1. Remove the console tray insert.
2. Remove the screw (2) attaching the console trim plate (1) to the floor console.
3. Pull up on the console trim plate disconnecting the six retaining tabs.
4. Disconnect the power window switch and traction control switch connectors (3), if equipped.
5. Remove the power window switch.
6. Remove the traction control switch, if equipped.
7. Remove the cupholder.

INSTALLATION PROCEDURE




1. Install the cupholder.
2. Install the traction control switch, if equipped.
3. Install the power window switch.
4. Connect the power window switch and traction control switch connectors (3).
5. Install the console trim plate (1) to the center console until the retaining tabs are engaged.
6. Install the screw (2) securing the console trim plate (1) to the center console.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2 N.m (18 lb in).

7. Install the console tray insert.