Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2005 >> GTO V8-6.0L VIN U >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Adjustments



CRUISE RELEASE SWITCH ADJUSTMENT




1. Disconnect the negative battery cable.
2. Remove the left closeout panel.
3. Remove the left ventilation ducts.
4. Remove the stop lamp switch.
5. Disconnect the cruise switch electrical connector by pressing the connector locking tab while pulling on the cruise control switch connector.
6. Turn the cruise control release switch assembly counterclockwise 90 degrees and pull out of the brake pedal support.
7. Push the switch assembly (1) so the plunger is pressed and the end switch barrel is against the brake pedal (2).
8. Turn the cruise control release switch assembly (1) clockwise 90 degrees to lock in place. The distance between the brake pedal and the switch barrel should be 0.2-1.2 mm (0.008-0.047 in).
9. Install the stop lamp switch.
10. Install the left ventilation ducts.
11. Install the left I/P lower insulator panel.
12. Connect the negative battery cable.
pro multis · About Operation CHARM