Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2005 >> GTO V8-6.0L VIN U >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair



CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the generator bracket assembly.




2. Disconnect the camshaft position (CMP) sensor electrical connector (1).




3. Remove the CMP sensor mounting bolt (1).
4. Remove the CMP sensor assembly (2, 3) from the engine front cover.

INSTALLATION PROCEDURE




1. Install the CMP sensor assembly (2, 3) to the engine front cover.

IMPORTANT: Before installing the camshaft sensor assembly, apply a small amount of clean motor oil to the O-ring (6).

2. Install the CMP sensor mounting bolt (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the camshaft position mounting bolts 25 N.m (18 lb ft).




3. Install the CMP sensor electrical connector (1).
4. Install the generator assembly.
pro multis · About Operation CHARM