Scan Tool Data List

Scan Tool Data List
The Shift lock Control Scan Tool Data List contains all shift lock control related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists, and in some cases may appear more than once, or in more than one data list in order to group certain related parameters together.

Use the Shiftlock Control Scan Tool Data List only after the following is determined:
^ The Diagnostic System Check - Vehicle is completed.
^ No diagnostic trouble codes (DTC's)
^ On-board diagnostics are functioning properly.

Scan tool values from a properly functioning system may be used for comparison with the system you are diagnosing. The Shiftlock Control Scan Tool Data List represents values that would be seen on a normal functioning system engine.

Important: A scan tool that displays faulty data should not be used. The scan tool problem should be reported to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.

Only the parameters listed below are referenced in this service manual for use in diagnosis. If all values are within the typical range described below, refer to Symptoms - Automatic Transmission Shift Lock Control for diagnosis.

The column labeled Data List indicates where a parameter can be located on the scan tool. Refer to the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed:

Cruise/Traction
Cruise/Traction Data List
Eng
Engine Data List
Electrical/Theft
Electrical/Theft Data List
IPC
IPC Data List
MT
Manual Transmission Data List
TAC
Throttle Actuator Control (TAC) Data List