Intake Manifold: Specifications

Throttle Body Bolt/Nut 10 Nm (89 inch lbs.)
Upper Intake Manifold Cover Nut 3 Nm (27 inch lbs.)





Upper Intake Manifold Bolt
Install the upper intake manifold bolts and the studs (1-10).
Tighten the bolts in sequence to 10 Nm (89 inch lbs.).





Lower Intake Manifold - Non-Supercharged (Non-SC)
Install the lower intake manifold bolts (1-12).
Tighten the lower intake manifold bolts in sequence
L26 to 15 Nm (11 ft. lbs.).





Lower Intake Manifold - Supercharged (SC)
Align the coolant bypass tube with the opening in the manifold.
Install the lower intake manifold bolts.
Tighten from the center to the outside in sequence
L32 to 15 Nm (11 ft. lbs.).