Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Service and Repair



CRUISE CONTROL SWITCH REPLACEMENT

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel.




4. Remove the cruise control switch screws (1).
5. Remove the steering wheel shroud screws (2).
6. Remove the steering wheel shroud (3).




7. Disconnect the electrical connector.
8. Remove the cruise control switch (1) from the steering wheel (2).

INSTALLATION PROCEDURE




1. Install the cruise control switch (1) to the steering wheel (2).
2. Connect the electrical connector.




3. Install the steering wheel shroud (3) to the steering wheel.
4. Install the steering wheel shroud screws (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the steering wheel shroud screws to 3.5 N.m (31 lb in).

5. Install the cruise control switch screws (1).

Tighten the cruise control switch screws to 3.5 N.m (31 lb in).

6. Install the steering wheel.
7. Install the inflatable restraint steering wheel module.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.