Window Track: Service and Repair

Window Guide Replacement - Door

Removal Procedure





1. Remove the rear side door trim. Refer to Trim Panel Replacement - Side Rear Door Service and Repair.
2. Remove the rear water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
3. Loosen the rubber window run channel along the center guide channel.
4. Remove the following components from the rear door:

* The 2 bolts (2)
* The 2 screws (3)
* The window guide channel (1)




Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2screws (3).

Tighten the window guide channel bolts to 6.2 N.m (55 lb in).

2. Install the rubber window run channel into the center guide channel.
3. Install the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
4. Install the rear side door trim. Refer to Trim Panel Replacement - Side Rear Door Service and Repair