Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2005 >> Vibe FWD L4-1.8L VIN L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor Replacement - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor Replacement - Front



Wheel Speed Sensor Replacement - Front

Removal Procedure





1. Remove the wheel housing.

Important: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.

2. Disconnect the wheel speed sensor electrical connector (1).





3. Remove the 2 bolts retaining the wheel speed sensor pigtail harness (1).





4. Remove the wheel speed sensor retaining bolt (1) and remove the wheel speed sensor (2) from the steering knuckle.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the wheel speed sensor (2) to the steering knuckle. Secure with 1 bolt.
^ Tighten the front wheel speed sensor bolt to 8 Nm (71 inch lbs.).





2. Connect the wheel speed wiring harness (1) to the vehicle. Secure with 2 bolts.
^ Tighten the pigtail harness nut (2) to 8 Nm (71 inch lbs.) and pigtail harness nut (3) to 29 Nm (21 ft. lbs.).





3. Connect the wheel speed sensor electrical connector (1).
4. Install the wheel housing.
5. Perform Diagnostic System Check - Vehicle.
pro multis · About Operation CHARM